EZ–GLO IS A DETERGENT RESISTANT WATER BASED ACRYLIC FLOOR POLISH. EZ–GLO MAY BE USED ON ALL TYPES OF SEALED CONCRETE FLOORS AS WELL AS SEALED WOOD AND COMPOSITION FLOORS
• EZ Glo produces a beautiful, high gloss, wet look
shine upon drying, without buffing.
• Highly detergent resistant: EZ Glo is not harmed by
repeated scrubbing with a neutral detergent, or
damp mopping between buffings.
• Restore worn areas by re-coating with EZ Glo: Just
damp mop, apply and let dry. Spray Buffing will
blend in the re-coated area.
• Highly slip resistant: EZ-Glo meets the ASTM
D–2407 requirement for slip resistance.
• Economical: One gallon of EZ-Glo covers over
1200 sq. ft. per coat, and lasts for months without
• Simple Spray Buffing maintenance keeps the clean,
bright polished look for months, and the acrylic
polymers do not ever yellow. Remove old polish
thoroughly by scrubbing with CitraPro. Rinse floor
well and let dry completely.
HOW TO USE:
Remove old polish or wax thoroughly using . Thoroughly rinse floor and allow to dry completely. Spread EZ–Glo evenly
over entire floor with a Lambs Wool Applicator, or clean yarn mop. Allow to dry completely, usually 25–30 minutes.
Always apply EZ-Glo in thin coats. Allow to dry 24 hours before heavy traffic.
Maintenance: Occasional damp mopping with a neutral detergent, such as EZ-Clean, will maintain the smooth glossy
Heavy Traffic Areas: Clean with a neutral detergent, such as EZ Clean. Rinse and damp mop. Let floor dry thoroughly.
Apply 1 thin coat of EZ–Glo.
Stripping: CitraPro will easily strip EZ–Glo. As many as 10 coats of EZ–Glo may be applied without the need for stripping.
EZ–Glo will not yellow.
Note: A test area is recommended for all applications.